Fri 28 Sep 2007
Tags: hardware, linux.
We've been chasing a problem recently with trying to use dual
nvidia 8000-series cards with four displays. 7000-series cards
work just fine (we're mostly using 7900GSs), but with 8000-series
cards (mostly 8600GTs) we're seeing an intermittent problem with
one of the displays (and only one) going badly 'fuzzy'. It's not
a hardware problem because it moves displays and cables and
cards.
Turns out it's an nvidia driver issue, and present on the latest
100.14.11 linux drivers. Lonni from nvidia got back to us saying:
This is a known bug ... it is specific to G8x GPUs ... The
issue is still being investigated, and there is not currently
a resolution timeframe.
So this is a heads-up for anyone trying to run dual 8000-series
cards on linux and seeing this. And props to nvidia for getting
back to us really quickly and acknowledging the problem. Hopefully
there's a fix soonish so we can put these lovely cards to use.
Fri 28 Sep 2007
Tags: hardware, linux, tips.
I was building a shiny new CentOS 5.0 server today with a very nice
3ware 9650SE raid card.
Problem #1: the RedHat anaconda installer kernel doesn't support these cards
yet, so no hard drives were detected.
If you are dealing with a clueful
Linux vendor like 3ware, though, you can just go to their comprehensive
download driver page,
grab the right driver you need for your kernel, drop the files onto a
floppy disk, and boot with a 'dd' (for 'driverdisk') kernel parameter
i.e. type 'linux dd' at your boot prompt.
Problem #2: no floppy disks! So the choices were: actually exit the office
and go and buy a floppy disk, or (since this was a kickstart anyway) figure
out how to build and use a network driver image. Hmmm ...
Turns out the dd kernel parameter supports networked images out of the box.
You just specify dd=http://..., dd=ftp://..., or dd=nfs://..., giving it
the path to your driver image. So the only missing piece was putting the
3ware drivers onto a suitable disk image. I ended up doing the following:
# Decide what name you'll give to your image e.g.
DRIVER=3ware-c5-x86_64
mkdir /tmp/$DRIVER
cd /tmp/$DRIVER
# download your driver from wherever and save as $DRIVER.zip (or whatever)
# e.g. wget -O $DRIVER.zip http://www.3ware.com/KB/article.aspx?id=15080
# though this doesn't work with 3ware, as you need to agree to their
# licence agreement
# unpack your archive (assume zip here)
mkdir files
unzip -d files $DRIVER.zip
# download a suitable base image from somewhere
wget -O $DRIVER.img \
http://ftp.usf.edu/pub/freedos/files/distributions/1.0/fdboot.img
# mount your dos image
mkdir mnt
sudo mount $DRIVER.img mnt -o loop,rw
sudo cp files/* mnt
ls mnt
sudo umount mnt
Then you can just copy your $DRIVER.img somewhere web- or ftp- or
nfs-accessible, and give it the appropriate url with your dd kernel
parameter e.g.
dd=http://web/pub/3ware/3ware-c5-x86_64.img
Alternatives: here's an
interesting post
about how to this with USB keys as well, but I didn't end up going that way.
